# NLopt Matlab Reference

### From AbInitio

Revision as of 23:34, 22 June 2010 (edit)Stevenj (Talk | contribs) (Matlab docs) ← Previous diff |
Revision as of 18:25, 26 May 2011 (edit)Stevenj (Talk | contribs) (→Verbose output) Next diff → |
||

Line 108: |
Line 108: | ||

Just as in the C API, you can [[NLopt Reference#Stochastic population|get and set the initial population]] for stochastic optimization algorithms, by setting <code>opt.population</code> to an (integer) initial population. (An <code>opt.population</code> of zero implies that the heuristic default will be used.) | Just as in the C API, you can [[NLopt Reference#Stochastic population|get and set the initial population]] for stochastic optimization algorithms, by setting <code>opt.population</code> to an (integer) initial population. (An <code>opt.population</code> of zero implies that the heuristic default will be used.) | ||

+ | |||

+ | ==Vector storage for limited-memory quasi-Newton methods== | ||

+ | Just as in the [[NLopt Reference#Vector storage for limited-memory quasi-Newton methods|C API]], you can set the default number ''M'' of stored vectors for limited-memory quasi-Newton methods, via: | ||

+ | |||

+ | opt.vector_storage | ||

+ | |||

+ | (The default is 0, in which case NLopt uses a heuristic nonzero value.) | ||

==Verbose output== | ==Verbose output== |

## Revision as of 18:25, 26 May 2011

NLopt |

Download |

Release notes |

FAQ |

NLopt manual |

Introduction |

Installation |

Tutorial |

Reference |

Algorithms |

License and Copyright |

The NLopt includes interfaces callable from the Matlab and GNU Octave (a free-software Matlab-like program), using identical syntax.

The main purpose of this section is to document the syntax and unique features of the Matlab API; for more detail on the underlying features, please refer to the C documentation in the NLopt Reference.

## Using the NLopt Matlab API

On Unix, the Matlab and Octave interfaces should automatically be installed in places where they will be found at runtime, assuming you have Matlab and Octave correctly installed on your machine, as documented in the Installation manual.

On Windows, we provide a precompiled .zip file of the NLopt library, which includes a `matlab`

directory. In this directory are a set of `.m`

files (mostly implementing constants and documentation) and a `nlopt-optimize.c`

file which can be compiled into a w:MEX file callable from Matlab. All of these files must be placed somewhere in your Matlab path or in your working directory if you want to use them.

## The `opt`

structure

The NLopt API revolves around an Matlab structure, analogous to the `nlopt_opt`

object in C and similar objects in NLopt's interfaces for other languages. All of the parameters of the optimization are specified (dimensions, algorithm, stopping criteria, constraints, objective function, etcetera) simply by assigning fields to this structure, and then one finally calls the `nlopt_optimize(opt)`

function in order to perform the optimization. Every `opt`

structure should specify the algorithm, via:

opt.algorithm =algorithm

given an

(see NLopt Algorithms for possible values) and the dimensionality of the problem (*algorithm*`n`

, the number of optimization parameters). Just as in C, algorithms are specified by predefined constants of the form `NLOPT_MMA`

, `NLOPT_COBYLA`

, etcetera.

*You need not set all the fields* of the structure; any fields that are not specified take on innocuous default values (the same as if you did not specify those parameters in the C interface).

The dimension *n* of the problem (the number of optimization parameters) is determined implicitly by the length of the vector you pass to `nlopt_optimize`

as the initial guess. An error will occur if you use vectors of inconsistent lengths (e.g. you set `opt.lower_bounds`

to be a different length).

## Objective function

The objective function is specified setting either the `opt.min_objective`

or `opt.max_objective`

field to a function handle for the objective function *f*, depending on whether one wishes to minimize or maximize `f`

, respectively. The function `f`

should be of the form:

function [val, gradient] = myfunc(x) val =...value of f(x)...if (nargout > 1) gradient =...gradient at x...end

The first return value should be the value of the function at the point `x`

, where `x`

row or column vector of the `n`

of the *n* optimization parameters (the same length as the initial guess passed to `nlopt_optimize`

). (Whether `x`

is a row or column vector depends on whether the initial guess you pass to `nlopt_optimize`

is a row or column vector, respectively.)

In addition, if the caller requests two return values (`nargout > 1`

), then the second return value `gradient`

should be a vector (row or column) of length `n`

that is the gradient of the function with respect to the optimization parameters at `x`

. That is, `grad(i)`

should upon return contain the partial derivative , for . Not all of the optimization algorithms (below) use the gradient information: for algorithms listed as "derivative-free," the `nargout`

will always be 1 and the gradient need never be computed.

## Bound constraints

The bound constraints can be specified by setting `opt.lower_bounds`

and/or `opt.upper_bounds`

to vectors of length *n* (the same as the length of the initial guess passed to `nlopt_optimize`

).

To specify an unbounded dimension, you can use ±`inf`

in Matlab to specify ±∞.

## Nonlinear constraints

Just as for nonlinear constraints in C, you can specify nonlinear inequality and equality constraints by setting `opt.fc`

and `opt.h`

to be cell arrays of function handles (of the same form as the objective function above) for the inequality and equality constraints, respectively.

Recall that a cell array is specified via `{...}`

in Matlab, e.g. `{ @constraint1, @constraint2 }`

.

Optionally, you can specify a tolerance in judging feasibility for the purposes of stopping the optimization, as in C. Tolerances are specified as fields `opt.fc_tol`

and `opt.h_tol`

, which (if they are set) should be vectors (not cell arrays) of tolerances, of the same lengths as `opt.fc`

and `opt.h`

, respectively. (If they are not specified, the tolerances default to zero.)

## Stopping criteria

As explained in the C API Reference and the Introduction), you have multiple options for different stopping criteria that you can specify. (Unspecified stopping criteria are disabled; i.e., they have innocuous defaults.) The various stopping criteria can be specified via the following fields of your structure.

opt.stopval

Stop when an objective value of at least `stopval`

is found.

opt.ftol_rel

Set relative tolerance on function value.

opt.ftol_abs

Set absolute tolerance on function value.

opt.xtol_rel

Set relative tolerance on optimization parameters.

opt.xtol_abs

Set absolute tolerances on optimization parameters. The `opt.xtol_abs`

value must be a vector of length `n`

(the same length as the initial guess passed to `nlopt_optimize`

) of the tolerances.

opt.maxeval

Stop when the number of function evaluations exceeds `maxeval`

. (0 or negative for no limit.) An integer.

opt.maxtime

Stop when the optimization time (in seconds) exceeds `maxtime`

. (0 or negative for no limit.)

## Performing the optimization

Once all of the desired optimization parameters have been specified in a given structure `opt`

, you can perform the optimization by calling:

[xopt, fmin, retcode] = nlopt_optimize(opt, x);

On input, `x`

is a vector (row or column) of length `n`

(this specifies the dimension of the problem, and must be consistent with vectors you use elsewhere as mentioned above) giving an initial guess for the optimization parameters. The return value `xopt`

is a vector (row or column, same as `x`

) containing the optimized values of the optimization parameters.

The second return value `fmin`

is the optimized value of the objective function, and the third value is a return code (negative on failure and positive on success).

## Local/subsidiary optimization algorithm

Some of the algorithms, especially MLSL and AUGLAG, use a different optimization algorithm as a subroutine, typically for local optimization. You can change the local search algorithm and its tolerances by setting the `opt.local_optimizer`

field to *another* optimization structure.

For example, `opt.local_optimizer.algorithm = NLOPT_LN_BOBYQA; opt.local_optimizer.ftol_rel = 1e-4`

will set the local optimizer to use BOBYQA and a relative function tolerance of `1e-4`

.

The fields of `opt.local_optimizer`

are used to determine the local search algorithm, its stopping criteria, and other algorithm parameters. (However, the objective function, bounds, and nonlinear-constraint parameters of `opt.local_optimizer`

are ignored.)

## Initial step size

Just as in the C API, you can get and set the initial step sizes for derivative-free optimization algorithms. In Matlab, you set the `opt.initial_step`

field to a vector of the (nonzero) initial steps for each dimension.

## Stochastic population

Just as in the C API, you can get and set the initial population for stochastic optimization algorithms, by setting `opt.population`

to an (integer) initial population. (An `opt.population`

of zero implies that the heuristic default will be used.)

## Vector storage for limited-memory quasi-Newton methods

Just as in the C API, you can set the default number *M* of stored vectors for limited-memory quasi-Newton methods, via:

opt.vector_storage

(The default is 0, in which case NLopt uses a heuristic nonzero value.)

## Verbose output

If you set `opt.verbose`

to `1`

, the Matlab interface will output information as the optimization progresses, such as the objective function values.

Of course, your objective function and constraints can also output anything you wish, using `disp`

and similar Matlab functions.